EverFocus EKR-KB1 operating instructions JVC TK-C675 Dome, Reference material and documents

6.10 JVC TK-C675 Dome

6.10.1 Reference material and documents

Dome JVC TK-C675

TK-C675 Programmer’s manual, version 1.00/Feb.1998 TK-C675/C675B Programmer’s manual (supplement), version 0.01/Dec.1998

JVC CCTV Serial Communication Protocol, Basic Protocol Reference, version 2, Jan.1998

6.10.2 Connection

6.10.2.1 Cable

White	RS485A	Rx +
Yellow	RS485B	Rx -

6.10.2.2 Dome settings

Dome ID-number must be set according to the respective installation manual.

Protocol must be set as Multidrop/Simplex.

6.10.2.3 Keyboard settings

During Keyboard setup, submenu  must be suitably set:









Baudrate is fixed (9600 baud).

6.10.3 Setup

Dome setup is mostly carried out by On Screen Menu.

Some parameters can be set up by pressing a combination of keys or by inserting a special code.

For all setup operations the keyboard must be enabled to perform the receiver setup (menu ).

6.10.3.1 OSM setup

Connect the dome directly to the keyboard and a monitor to the dome video outlet : start dome setup

The dome shows the menu on video; the keyboard shows the mode change on the display:







setup end

corresponds to Set key shown in the dome instruction manual, to enter the submenu

allows the exit from submenu

Page 81 MNNCEKRKB1_0439