EverFocus EKR-KB1 operating instructions Assigning the telemetry lines

Shown on display		Submenu	Description
	
		
		
		
		
		
		
		
			Power saving	puts	the keyboard		in	low
			consumption	mode	after one	minute		of
		
			inactivity.
			Management	of	warning	and	error
			messages;
		
			see § 4.12 - Warning and error messages,
		
			page 22
			Autotest	of	serial	channels
			see § 4.13 - Autotest of serial channels,
		
			page 23
		
			Joystick	operation			test.
			The test is described at § 4.9 - Joystick
			calibration and test, page 21
			Internal memory test, useful in the case of
			faulty operation and telephone assistance.
		











Changes display contrast: press and

 to alter contrast.

recalls the previous contrast value and recalls the default value.

	Resets factory default values. The reset
	operation should be confirmed by the
	operator.

	Saves new settings and exits menu.

4.4 Assigning the telemetry lines

Assigning the telemetry lines has been inserted in the menu for accepted cameras. See the next section.

4.5 Accepting requests for cameras and assigning receivers

Accepting requests for cameras allows keyboard use to be limited solely to authorised input videos without having to use further system passwords. We recommend defining the accepted input video groups for each keyboard only after clearly defining the system configuration.

For each camera, in this menu it is necessary to define:

•acceptance of the camera when recalled by the keyboard

•the receiver/dome number (if present) to which the camera is connected

•the telemetry line (A or B) to which the corresponding receiver/dome is connected.

Page 16 MNNCEKRKB1_0439