EverFocus EKR-KB1 operating instructions Panasonic Dome, Important protocol note Connection

6.12 Panasonic Dome

6.12.1 Reference material and documents

Dome Panasonic WV-CS600 e Panasonic WV-CS850

Protocol Information WV-CS850 ver 2.2, Nov.28, 2001

Protocol Information WV-CSR600, WV-CSR400, WV-BSR300 ver 5.3, Nov.27, 1997

6.12.2 Important protocol note

The Panasonic protocols allow the control of a range of domes with different features. As the protocols have been wholly implemented the following commands can be used both for the WV-CS600 and WV-CS850 models or they’re peculiar of only one model. Where possible, this difference has been specified in the following paragraphs. In any case, check in the dome instruction manual for the available functions list.

6.12.3 Connection

6.12.3.1 Cable

Panasonic WV-CS600

Panasonic WV-CS850

White RS485A Yellow

Yellow RS485B Green

6.12.3.2 Dome settings

Warning! Even though the two Panasonic dome control protocols (Panas600 and Panas850) are compatible to a certain degree, to achieve better control of the dome we advise choosing the more suitable.

Set “Conventional protocol”, LOCAL (not REMOTE)

8 data bits, no parity, 1 stop bit, Full Duplex Wait time = 0

Dome ID-number must be set according to the respective installation manual.

Baudrate can be selected among the following values: 2400, 4800, 9600, 19200 (default) baud.

6.12.3.3 Keyboard settings

During Keyboard setup, submenu  must be suitably set:

















Panasonic 600

Baudrate must be equal to the one selected for the dome.

Panasonic 850

Baudrate must be equal to the one selected for the dome.

Page 86 MNNCEKRKB1_0439