EverFocus EKR-KB1 operating instructions multi quad plus still live vcr

5.19.4 Configuration

The multiplexer is configured by On Screen Menu. Refer to the corresponding manual for an explanation of the various configuration items.

The multiplexer should be configured for RS485 type communication, with an appropriate identification address and baud rate.

5.19.4.1 OSM Configuration

Connect the multiplexer directly to the keyboard and a monitor to the MONITOR 1 output. starts multiplexer configuration.

The multiplexer shows the on screen menu; the keyboard display indicates the mode change:







/ : increase and decrease the selected value

start and end of the configuration

equivalent to the NEXT key

equivalent to the BACK key

exits the special mode of configuration Joystick : movement within the menus.

5.19.5Dedicated Functions

As well as the normal procedure for selecting input videos, the Sanyo multiplexer is provided with numerous other functions that are activated by pressing key combinations corresponding to the keys on the multiplexer’s local keypad.

The key is used to change the number of the unit responding to the command.

control of the master monitor

, ,,control of one spot monitor

5.19.5.1Multiplexer functions

• multi

•quad

•plus

•still

•live

•vcr

5.19.5.2 Other functions

•sequence

•reset alarms

Page 58 MNNCEKRKB1_0439