EverFocus EKR-KB1 operating instructions Video matrix Videotec SW328, Matrix setup

5.10 Video matrix Videotec SW328

5.10.1 Description

Matrix SW328 is a product for professional use in applications for security and surveillance and dedicated to the management of video signals. It can be used to control 32 input videos; there are eight video outputs, one of which can be managed directly by a VCR. It is used to control the usual switching and alarm management operations. Refer to the matrix manual for further information on this subject.

5.10.2 Connection

5.10.2.1 Cable

The communication cable is standard, as described in § 3.3 - Standard connection cable, page 12.

5.10.2.2Matrix settings No setting is necessary.

5.10.2.3Keyboard settings

While the keyboard is being set up, the submenu should be set as follows:









Control of a SW328 matrix

The baud rate is fixed at 9600 baud.

The presence of more keyboards connected to the switcher means it is necessary to define a different identification number for each (from 1 to 8).

5.10.2.4 Operational test

If the keyboard is connected directly with the switcher set up in this way using the telephone cable supplied, it should be possible to switch the input videos immediately:

•press to select monitor 1

•press , , to select the cameras.

Warning! Matrix SW328 can be set up so as to exclude control by the keyboard during certain periods of the day or in specific situations. In this case switching will be impossible. Refer to the respective manual.

5.10.3 Matrix setup

A remote keyboard can only set date and time on matrix SW328

To change date and time press .

Key : move the cursor to the next position

Key : move the cursor to the previous position

Keys /: increase/decrease the value.

Page 38 MNNCEKRKB1_0439