EverFocus EKR-KB1 operating instructions Dedicated functions

5.13.2.4 Operational test

If the keyboard is connected directly with the multiplexer set up in this way using the cable as indicated above, it should be possible to switch the input videos immediately:

•press to select multiplexer unit 1

•press , , to select the input videos.

Each command sent by the keyboard corresponds to the lighting up of an LED on the local multiplexer keyboard.

Warning! If the number of the multiplexer unit does not coincide with the commands sent from the keyboard, they will be ignored.

5.13.3 Dedicated functions

As well as the normal procedure for selecting input videos, the Javelin multiplexer is equipped with numerous other functions that can be activated by pressing key combinations, and that correspond to the keys present on its local keypad.

The key is used to change the number of the unit responding to the command.

Only some of the functions given below are available for both models of the multiplexer. Refer to the multiplexer manual for further information.

live record, vcr, spot monitor

select, double select

menu

spot monitor output, auto, full, freeze “2nd” key, pip1, 2x2, 3x3 4x4, pip2, zoom, 3+4 2+8, set.

Page 45 MNNCEKRKB1_0439