EverFocus EKR-KB1 operating instructions Autopan and tour, Insert the tour number

6.18.5 Autopan and tour

Autopan is simulated with a movement between preset positions 1 and 2, thus modifying tour 4. Any previously stored setup for tour 4 will be lost.

6.18.5.1Autopan

start autopan

stop autopan

6.18.5.2 Tour

Tour corresponds to patrol. There are 4 tour sequences available.

start tour

When the key is pressed the display will ask for the tour number to be activated:





stop tour set up tour

Insert the tour number (1-4) or 0 to indicate the last tour to be stopped.

When the keys are pressed the display will ask for the tour number to be modified::







Insert the tour number (1-4).

















When this menu is entered, the tour has been erased. Choose the line “Add group” as many times as necessary to redefine the sequence of tour positions.

When the sequence is complete choose “Save and exit”.

Insert the desired position, the scan speed and dwell time in seconds (when the position is reached). For “Speed” and “Dwell time”, default values are suggested, but these can be changed.

Page 107 MNNCEKRKB1_0439