EverFocus EKR-KB1 operating instructions MNNCEKRKB10439

•if the set of accepted cameras is to be defined more precisely (some cameras in the set should be accepted and others not), press to subdivide the set shown into smaller sets.

•press to return to the previous display menus.

The following example shows how to accept cameras 1 to 7, and at the same time disable access to all the others. To camera 3 is assigned receiver 12 connected to telemetry line B::

































All cameras in the 1-1000 set are accepted, while those from 1001 to 3000 are not. Select the 1-1000 set with the joystick 

and press to completely disable all cameras.

The icons on the right of the display show that none of the cameras in the sets from 1 to 3000 are now available on request.

Select the 1-1000 set with the joystick and press to pass to a more precise definition level.

The sets shown on the display are now of 100 cameras each. None of the cameras in the sets are accepted.

Select the 1-100 set with and press to pass to a more precise definition level.

Select the 1-10 set and press to accept all cameras in the set from 1 to 10.

Then press to define acceptance at the individual camera level.

















The menu changes to allow precise definition of the individual cameras.

Given that all cameras from 1 to 10 are now accepted, it is necessary to scroll the list with the joystick to disable cameras 8,9,10, as required in the example.

Scroll the list with until camera 8 is reached.

The heading on the first line means:

•: camera number

•: the camera can or cannot be selected from the keyboard

•: number of receiver/dome assigned to the camera

: control line (A or B) for the receiver/dome

Press  to disable camera 8. Disabling the camera will

automatically remove the receiver number and the corresponding telemetry line.

Continue in the same way to disable cameras 9 and 10.

Page 18 MNNCEKRKB1_0439