EverFocus EKR-KB1 operating instructions Autoscan, Patrol and Pattern

The ESC key required by dome configuration procedure is replaced by the key.

Important note! When exiting dome configuration it is necessary to press to return the keyboard to normal operation.

Joystick : cursor movement within the menus

: replaces the CTRL key.

: replaces the ESC key.

: replaces the TOUR key.

: replaces the PATTERN key.

: corresponds to the HOME key.

: corresponds to the MENU key.

: accepts and ends changes to an identification text.

: change identification texts.

Within the menu, pan & tilt movements are often required.

In this case keep the key pressed down and only release it when the movement is completed:

: Pan & Tilt control.

: zoom control.

,: focus control.

,: iris control.

Some dome configuration short cuts (such as direct entry to the PRESET menu by pressing the key) have not been implemented because they can be recalled from the main menu.

6.7.4 Preset, scan, home

(1÷240): store the current position as preset position number X

(1÷240): delete preset position number X

(1÷240): movement towards previously stored position X

: movement towards the Home position

6.7.5 Autoscan, Patrol and Pattern

The dome has 8 Autoscan layouts, 8 Tours and 4 Patterns, configured by On Screen Menu. (1÷8): start autoscan X

(1÷8): start tour X

(1÷4): start pattern X

Page 74 MNNCEKRKB1_0439