EverFocus EKR-KB1 operating instructions Preset, scan, home, patrol, OSM Setup

6.14.3.1 OSM Setup

Connect the dome directly to the keyboard and connect a monitor to the dome video outlet. The EKR-KB1 keyboard enters special mode while the dome is being set up.

starts dome setup.

The dome shows the menu on video; the keyboard shows the mode change on the display:







setup end

Joystick : movement within the menus

Zoom , Focus / , Iris / when present

: enter submenus

: ‘5’ key when necessary, as specified in the dome manual

6.14.4 Autopan

: start autopan

: stop autopan

6.14.5 Preset, scan, home, patrol

Warning! The ‘Scan’ and ‘Patrol’ instructions given in the dome manual do not correspond to commonly accepted use in this manual: for practical purposes the functions take on the ‘standard’ meaning and not that suggested by the dome manual:

•‘preset’ (associated with the key) means storage of the present position

•‘scan’ (associated with the key) means the pan & tilt movement towards a previously stored position; in the dome manual this function is called ‘preset’

•‘patrol’ (associated with the key) means a series of scans, where the previously stored positions are

shown one after the other in sequence; in the dome manual this function is called ‘scan’. The storage of the preset position is different for each dome model:

•SCC-641P: only from On Screen Menu

•SCC-643P: from On Screen Menu or from keyboard through direct control keys.

(0÷127): movement towards previously stored preset position X

(0÷127): storage of the preset position X (only for the model SCC-643P)

: movement towards the Home position, corresponding to preset position 1

: start patrol

: stop patrol

Page 95 MNNCEKRKB1_0439