CALC2:CONV:CAT?
“RES”,“ITS”,”ITS5”,”PT”,”CVD”,”TRES”,”TTEM”,”YSI”
The CALCulatesuffix, <chn>, specifies the channel (1 to 4) or memory chan-
nel (5 to14). Each item in the response list is enclosed in double quotes and
separated from other itemsby a comma. See Table 7 on page 128, for the avail-
able conversiontypes.
8.4.4.2 CALCulate<chn>:CONVert:COPY <dest chn>|ALL
Copiesthe conversion type, sub-ranges (ITS-90), serial number, and character-
izationcoefficients from one channel to another.
CALC2:CONV:COPY8
The CALCulatesuffix <chn> specifies the source channel (1 to 4). The <dest
chn> parameterspecifies the destination channel (1 to 4). When the copy is
performed, the source channel parameters are not affected.If the destination
channel typeis different from the source channel type, the error -294, "Incom-
patible type" is generated. Specifying the ALL parameter copies the source
channel parameters to all compatible channels. The exampleabove copies the
parametersfrom channel 2 to memory channel PMEM3.
This command may be password-protected. Toaccess this command:
•If the SYST:PASS:CONV? command returns a 0 (probe password-protec-
tion is disabled), the password is not required.
•If the SYST:PASS:CONV? command returns a 1 (probe password-protec-
tion is enabled), the password must be successfully entered using the
SYST:PASS:CEN<pass> command (see Section 9.4.11, Password Com-
mands).
8.4.4.3 CALCulate<chn>:CONVert:NAMe?
Returns the name of the selected conversiontype for the specified channel.
CALC2:CONV:NAME?
ITS
The CALCulatesuffix, <chn>, specifiesthe channel (1 to 4) or memory chan-
nel (5 to14). The conversion types and their names are listed in Table 7 on
page 128.
8.4.4.4 CALCulate<chn>:CONVert:NAMe <conv>
Sets theconversion type for the specified channel.
CALC2:CONV:NAMECVD
The CALCulatesuffix, <chn>, specifies the channel (1 to 4) or memory chan-
nel (5 to 14). The <conv>parameter is a mnemonic indicating the conversion
1529 Chub-E4 Thermometer Readout
User’s Guide
96