The WINDowsuffix, <n>, specifies the display set (1 to 9). The FIELd suffix,
<n>, specifiesthe field (1 to 8) within the display set. The response consists of
twonumbers separated by a comma. The first number represents the channel
associated withthe field. The second number represents the parameter to be
displayedin the specified field. See Table 5 on page 126, Field Types, for the
fieldtypes.
8.4.6.10 DISPlay:WINDow<n>:FIELd<n>:FEED <chn>[,<num>]
Sets the specified fieldwithin the specified display set.
DISP:WIND1:FIEL3:FEED 0,10
The WINDowsuffix, <n>, specifies the display set (1 to 9). The FIELd suffix,
<n>, specifiesth efield (1 to 8) within th ed isplay set. The <chn> parameter
specifieschannel (1 to 4) associated with the field. The <num> parameter spec-
ifiesthe parameter to be displayed in the specified field. See Table 5 on page
126, Field Types,for the field types.
8.4.7 Logging Commands
The loggingcommands are used for logging data automatically and on demand.
8.4.7.1 LOGging:AUTomatic:DELete [<num>|ALL]
Deletes entries from the auto log.
LOG:AUT:DEL10
Specifying a number in the <num> parameter causes all auto log entries with
that labelnumber (1 to 25) to be deleted. If the ALL parameter is specified or
no parameter is specified,all auto log entries are deleted.
8.4.7.2 LOGging:AUTomatic:COUNt? [MIN|MAX|DEF]
Returnsthe number of measurements to be stored in the auto log during an auto
log session.
LOG:AUT:COUN?
5000
Specifying the MIN parameter returns a value of 1. Specifying the MAX pa-
rameter valuereturns a value of 8160. Specifying the DEF parameter returns a
valueof 8160.
8.4.7.3 LOGging:AUTomatic:COUNt <num>|MIN|MAX|DEF
Sets thenumber of measurements to be stored to the auto log during an auto
log session.
LOG:AUT:COUN100
1529 Chub-E4 Thermometer Readout
User’s Guide
106