7.2.2 Copy Probe
The COPYPROBE function allows you to copy a set of probe parameters from
one channelo rmemory location to another. The parameters are copied from the
user selected source channel or memory locationinto the current channel. The
COPY PROBEfunction can be password protected to restrict access. See Sec-
tion 7.5.3, Password,for more information. If this function is password pro-
tected, the user isprompted to enter the password to gain access. If an incorrect
passwordis entered, the display shows the message PASSWORD INCOR-
RECT and access is denied. If the correct password isentered or if this function
is notpassword protected, the bottom portion of the display appears showing
the source channelo r memory location,the probe serial number, and the con-
versiontype. The destination channel or memory location is displayed after the
source channel type is selected.
Use theLR buttons to select the source channel or memory location. Press
the Enter buttonto save the new setting. Press the Exit button to cancel and to
exitto the menu.
7.2.3 Test Probe
The TEST PROBEfunction allows you to test the probe characterization algo-
rithmand characterizationcoefficients for a specific probe. The probe and
probe typemust be setup in the EDIT PROBE function prior to entering the
TEST PROBEfunction. When this function is selected, the bottom portion of
1529 Chub-E4 Thermometer Readout
User’s Guide
44
1
24.159C
3
24.142C
2
24.634C
4
24.015C
FROM CH:
PMEMO
SERIAL:
P5
TYPE: PT100
TO CH:
CHAN1
EXIT
ENTER / MENU UNIT CONTRAST
1529
CHUB E-4THERMOMETER READOUT
Figure15 Copy Probe