•<num> indicates numeric value is required.
•<chn list> indicates a list of channel numbers is required.
•<bool> indicates a Boolean value (0 or 1) is required. The mneumonics
OFF and ON are also accepted for 0 and 1, respectively.
•<conv> indicates a conversionmnemoic is required.
•<param> indicates a parameter name is required.
•<seri> indicates a serial number is required.
•<res> indicates a resistance value is required.
•<volt> indicates a voltage value is required.
•<unit> indicates a temperature unit is required.
•<pass> indicates a password is required.
•<port> indicates a port number is required.
•<label> indicates an eight character label is required.
•<year> indicates a four digit number is required.
•<month> indicates a one or two digit number is required.
•<day> indicates a one or two digit number is required.
•<hour> indicates a one or two digit number is required.
•<minute> indicates a one or two digit number is required.
•<second> indicates a one or two digit number is required.
•<baud> indicates a valid baud number is required.
8.4.1 Measurement Commands
The measurement commands are used to read information on the statistical cal-
culations and for reading themost recent measurement for a specified channel.
The measurement commands are not password protected.
8.4.1.1 CALCulate:AVERage:CLEar
Clearsthe statistical functions for all channels.
CALC:AVER:CLE
The *RST command clears thestatistical functions.
8.4.1.2 CALCulate<chn>:AVERage<n>:DATA?
Returns the value of a statistical calculation for a given channel.
CALC3:AVER1:DATA?
0.017
1529 Chub-E4 Thermometer Readout
User’s Guide
88