The GPIB parameter allowsthe user to enable o r disable the IEEE-488 port.
The ADDR parameterallows the user to specify the address of this instrument
on the IEEE-488 bus.The default address is 22 and the range is 1 to 30.
The TERM parameter allowsthe user to s electthe termination character trans-
mitted after each transmission. The defaulttermination character is linefeed
(LF).

7.5.2 Date Time

The DATETIME function is used for setting the time-of-day clock, time for-
mat, date,and date format. When this function is selected, the bottom portion
of the displayshows the hour, minute, second, time format, day, month, year,
and date format.
The HOUR parameterallows the user to set the current hour (0 through 23).
The MINUTE parameter allowsthe user to set the current minutes (0 through
59).
The SECOND parameterallows the user to set the current seconds (0 through
59).
The T FORM parameter allows the user to set the time format used for display-
ing the time.The choices are 12-hour format or 24-hour format.
The DAYparameter allows the user to set the current day (1 through 31).
The MONTH parameter allowsthe user to set the current month (1 through
12).
The YEAR parameter allowsthe user to set the current year (1999 through
9999).
73
7 Menu Functions
System Menu
1
24.159C
3
24.142C
2
24.634C
4
24.015C
HOUR: 13
MINUTE: 25
SECOND: 5
DAY: 12
MONTH: 10
YEAR: 2000
D FORM: M-D-YY
T FORM: 24 HR
EXIT
ENTER / MENU UNIT CONTRAST
1529
CHUB E-4THERMOMETER READOUT
Figure44 Date Time