Creating and generating a report | Reports |
|
|
4Select the type of matching for the filter criteria:
•Select Any to find any matches for the criteria specified.
•Select All to find all criteria. All criteria must match to display in the results.
5Select whether to have log messages less than and equal, equal or greater than and equal to the level you selected. For a list of log policies levels and how they relate to each other, see “Log policy” on page 42.
6Select the filtering criteria for the remaining fields. The number of fields and the information you can filter on depends on the type of log you are filtering.
Select the Not option when you want to exclude specific information. For example, for the Source IP field, do not include any information from a specific source IP address in the log report.
Creating a filter profile
You can save the filter options as a filter profile. After creating a filter profile, you can select the profile for use in other reports.
To create a report filter profile
1Select New. or
Start with an existing profile by selecting the profile and selecting Clone.
2Enter a name for the profile and select OK.
3Select the filter options for the report.
4Select Apply.
Setting a report schedule
Set a schedule so that FortiLog generates reports at a consistent time. The default is to run a report for daily at 6pm. You can save a schedule to use in other reports.
Figure 32: Report scheduling
To create a scheduled report
1Go to Reports > Config.
2Select a report from the list.
62 | Fortinet Inc. |
