Vulnerability reports | Reports |
|
|
Figure 39: Selecting scan targets
To select the scan targets
1Go to Reports > Config > Vulnerability.
2Select a report from the list.
3Select Scan Targets.
4Select devices from the Available IP Aliases list.
5Select the right arrow to move the device to the Selected IP Aliases list.
6To add additional devices, select Create New, and repeat step 4 and 5.
7Select Apply.
To add additional devices
1Select Create New.
2Enter a name of the host, network or IP address range in the Alias text box.
3Enter the IP address of the host, network or the IP range.
4Select OK.
5Select the device from the Available IP Aliases list.
6Select the right arrow to move the device to the Selected IP Aliases list.
7Select Apply.
Creating a scan target profile
You can save the selections as a scan target profile. After creating a scan target profile, you can select the profile for use in other vulnerability reports.
To create a scan target profile
1Select New.
2Enter a name for the profile and select OK.
3Select the devices to include in the profile.
70 | Fortinet Inc. |
