Fortinet FortiLog-400, FortiLog-100 manual Set system, 104, Set report command architecture

CLI commands FortiLog CLI reference

set report

Use set report to configure the FortiLog report settings.

Table 10: set report command architecture

set report

resolve <services aliases>
alias <alias>	hostnetrange <x.x.x.x/n-y.y.y.y/n>

Commands Description

set report resolve <services aliases Select Resolve IP Ports to Service Name to view the port number by its service name. For example, display HTTP rather than port 80

set alias hostnetrange <x.x.x.x/n- Set the alias name for the IP address of the host, network or the IP range. y.y.y.y/n>

set system

Use set system to configure the FortiLog system settings.

Table 11: set system command architecture

set

system

		password
		<password_str>
		<return>
admin		permission {readonly
	username	readwrite}<return>
		trusthost	<xxx.xxx.xxx.xxx> or
	<name_str>
		<xxx.xxx.xxx.xxx> or	<0.0.0.0> for anynet
		<0.0.0.0> for anyip	mask <return>
		address
		status <enable
		disable>
	primary
	{xxx.xxx.xxx.xxx
dns	none} <return>
	secondary
	{xxx.xxx.xxx.xxx
	none} <return>
hostname
<hostname_str>
<return>
			ping <return>
			https <return>
interface	config	allowaccess	ssh <return>
<intf_str>
			snmp <return>
			http <return>
			telnet <return>

104 05-16000-0082-20050115 Fortinet Inc.