Reports | Creating and generating a report |
|
|
3Select Schedule.
4Select a day from the following:
Not Scheduled Select to not run a daily report. Use this setting when you only want to run the reports as needed. For details on running on demand reports see “Reports on demand” on page 64.
Daily | Select to run the report every day at the same time. |
These Days | Select specific days of the week to run reports. |
These Dates | Select specific days of the month to run the report. For example, to run |
| reports on the first and fifteenth of every month, enter 1,15. |
5Select a specified time of the day to run the report, up to three times per day.
6Select Apply.
Creating a report schedule profile
You can save the schedule as a schedule profile. After creating a schedule profile, you can select the profile for use in other reports.
To create a report schedule profile
1Select New.
or
Start with an existing profile by selecting the profile and selecting Clone.
2Enter a name for the profile and select OK.
3Select the schedule for the report.
4Select Apply.
Choosing the report destination and format
Select destination and format for the report. Configure the FortiLog unit to either save the reports to the FortiLog hard disk or email the report to any number of recipients or both. The default is to save the report to the FortiLog hard disk in HTML format.
You can save the output options for use in other reports.
Figure 33: Select a file format
FortiLog Administration Guide | 63 |
