Creating and generating a report | Reports |
|
|
To select the report destination and format
1Go to Reports > Config.
2Select a report from the list.
3Select Output.
4Set the following options:
File Browse/Reports
Email it
Select the file format for the generated reports that are saved to the FortiLog hard disk. To access the reports on the hard disk, see “Viewing reports” on page 65.
Select the file formats for the generated reports that the FortiLog unit sends as an email attachment.
Email address Enter the email addresses of the recipients of the report. Add multiple
list | recipients by pressing Enter after each email address. |
5Select Apply.
Creating a report destination and format profile
You can save the selections in a output profile. After creating an output profile, you can select the profile for use in other reports.
To create a pre-defined output selection
1Select New. or
Start with an existing profile by selecting the profile and selecting Clone.
2Enter a name for the profile and select OK.
3Select the destination and format options.
4Select Apply.
Reports on demand
Reports on demand provides an instant report. When requesting a report, the FortiLog unit compiles the data from the available device logs and immediately generates a report based on your requirements and the log data available.
The on demand reports include the same information and options as a scheduled report.
To generate a report on demand
1Go to Reports > Config.
2Select a report from the list or select options for the report.
3Select Run now.
64 | Fortinet Inc. |
