3.4 Donor Magazine Replacement
Front Lower | NOTE: Be sure to replace the donor magazine with the power switch ON |
Door | ( ). |
|
If the power switch is OFF (), the machine will not detect the replacement. The D LED lamp on the transfer monitor comes on the next time the power switch is turned to ON ( ). The trailing edge discharge (explained later) may not be performed.
| Inner Door Lock |
Inner Door | Lever |
1.Make sure that LED lamps 1 to 10 on the transfer monitor are off, and then open the front lower door.
IMPORTANT:
If any door is opened if any of the LED lamps 1 to 10 on the transfer monitor is on, donor/receiver jamming occurs.
2.Rotate the inner door lock lever 90 degrees to open the inner door.
3.Pull the donor magazine straight out.
Donor Magazine
4.
5.
Place the donor magazine as shown in the illustration.
Unlock both sides of the donor magazine and open the cover.
28