FujiFilm 4500N instruction manual Using in the Macintosh Environment

4.15 Network setting

4.15.2.2Using in the Macintosh Environment

This section describes how to set up a Macintosh and this product to print from a Macintosh using the AppleTalk protocol.

This product is for the Macintosh/PowerMacintosh series with System 7.5 or later, MacOS7.6 or later, MacOS8.x, or MacOS9. (It does not work with AppleTalk Phase1.)

Setup Utility that comes with this product uses TCP/IP.

The setting up procedure on MacOS X is also described.

AppleTalk can also be used in MacOS X environment.

NOTE: The printer driver is compatible to MacOS8.6 and up.

4.15.2.2.1 Setting It Up on MacOS9 or Earlier (The figures are from MacOS9.)

It is, therefore, necessary to set up Open Transport, TCP/IP, or

Mac TCP.

1.Insert the User Software CD-ROM into the computer's disc drive to mount the CD-ROM.

★Double click the CD-ROM icon (PG45NDRV.)

2.Three folders appear.

★ Double click the [Utility] folder.

3.Two folders appear.

★ Double click the "Mac OS(Classic)" folder.

4.Some files and folders appear.

★ Double click the "Installer" icon.

4

HOW TO USE THE OPERATION PANEL

75