| PREV |
|
| ESC | SEL |
| NEXT |
|
Subnet Mask | ] | |
] |
| |
– | 255.255.255.0 | + |
[ | [ | |
|
| PREV |
|
| ESC | SEL | |
|
| NEXT |
|
Default Gateway |
| ] | |
] |
|
| |
– | 192.168.001.001 | + | |
[ | [ | ||
|
| PREV |
|
|
| ESC | SEL |
|
| NEXT |
|
| ] |
| ] |
AppleTalk | – | Enable | + |
[ | [ | ||
| ] |
| ] |
AppleTalk | – | Disable | + |
[ | [ |
PREV
ESCSEL
NEXT
Mac Address 00:C0:2D:20:00:07
4.15 Network setting
10.Press the NEXT key.
★Screen for setting subnet mask opens. Subnet mask currently set is displayed at this time. Move four figures to be changed using the SEL key and change numeric figures using the - or + key. (Numeric figures from 0 ~
255 can be used).
NOTE: When setting of DHCP/BOOTP or RARP is "Enable", the set
numeric figures can only be displayed, not changed.
11.Press the NEXT key.
★Screen for setting default gateway opens. Default gateway currently set is displayed at this time. Move four figures to be changed using the SEL key and change numeric figures using the - or + key. (Numeric
figures from 0 ~ 255 can be used).
NOTE: When setting of DHCP/BOOTP or RARP is "Enable", the set
numeric figures can only be displayed, not changed.
12.Press the ESC key.
★Screen for setting TCP/IP opens.
13.Press the NEXT key.
★Screen for setting AppleTalk opens.
When AppleTalk is to be enabled, select "Enable" using the - or + key and when it is to be disabled, select "Disable".
14.Press the NEXT key.
★MAC address is displayed.
70
