7.1When a Problem Occurs
Symptom | Possible Cause | Remedial Action |
The power does not turn ON. (Nothing | Power switch is not turned | Turn the power switch to ON ( ). |
is displayed on the operation panel.) | ON. |
|
|
|
|
| Power cable is not properly | Pull out and securely reconnect the |
| connected. | power cable. |
|
|
|
| Power is not supplied to the | Check if power is being supplied to the |
| outlet. | power outlet. |
|
|
|
■ The jam error code | Insufficient water in the water | Insert the water supply hose into the |
coating section | water supply port until it clicks into | |
detach) frequently appear in the |
| position. |
display. |
|
|
| Make sure that the | |
■ The print is blank or partially blank. |
| |
| both on the water filter and the water | |
|
| |
|
| filter holder (on the main unit). |
|
|
|
|
| Replace the water filter. |
|
|
|
The water bottle is set in position, but a | The water bottle has been | Turn ON ( ) the power switch and |
"Warning Check Water Bottle" error | inserted while the power is set | remore the water bottle. After 10 |
appears in the display. | to OFF ( ). | seconds, |
|
|
|
After the power is set to ON ( ), a | One week or more passed | Replace the water. (See page 35.) |
"Warning WATER CHANGE" error | since the last water |
|
appears in the display. | replacement. |
|
|
|
|
The donor or receiver magazine is set in | Magazine is not installed | Install the magazine properly according |
position but a "Warning Check Donor- | properly.The magazine is not | to the magazine replacement procedure. |
Magazine" or "Warning Check Paper- | pushed all the way in. | (See pages 27 and 32.) |
Magazine error appears in the display. |
|
|
|
|
|
After the power is set to ON ( ), a | Donor or receiver is used up. | Replace the magazine according to |
"Warning Donor Empty" or "Warning |
| the magazine replacement procedure. |
Paper Empty" error appears in the display. |
| (See pages 27 and 32.) |
|
|
|
The host computer is used to start a | The interface cable is not | Remove the interface cable, and then |
print job, but the printer does not | security connected. | reconnect it securely. |
respond. |
|
|
|
|
|
110
