6.8Jamming at Locations "5 and 9"
"J11" lever |
| |
| Thermal | |
Front Lower | Processing | |
Unit | ||
Door | ||
|
"J5" knob
1.Open the front lower door, raise the thermal processing unit release lever "J11", and slowly open the thermal processing unit to the right.
CAUTION:
The thermal processing unit is hot. Do not touch the thermal processing unit immediately after opening it.
2.Rotate the "J5" knob clockwise to move the jammed donor into the refuse compartment.
6
3.Pull out the refuse compartment and open its cover.
Refuse
Compartment
4.Push up the "J9" guide to remove the jammed receiver.
NOTE: If you do not find any paper, check the exit of the thermal
processing unit.
"J9" guide
5.Close the thermal processing unit.
