4.15 Network setting
5.The setup application (AdminManager) starts up, and it shows the Ethernet address (MAC address) and the current IP address of PICTROGRAPHY 4500N on the network.
(In case a subnet is being established, this display may not be made. Make broadcast address setting by referring to step 5 and step 10 of "3.6.3.1 Make settings in Windows environment" of "Installation guide".)
6.Click PICTROGRAPHY 4500N to select it. (It will be highlighted.) If it shows more than one PICTROGRAPHY 4500N, select the one you wish to set up.
★Select [PICTROGRAPHY Settings] from the [Setup] menu.
7.The setup dialog box appears.
Click the [General] tab to set up or change the root password.
★Click the [TCP/IP] tab to configure it to use or not use the TCP/IP protocol, and to set up each TCP/IP setting.
★Click the [Apple Talk] tab to configure it to use or not use the Apple Talk protocol, and to set up Printer and Zone when you choose to use it.
8.Select [IP address Setup] from the [Setup] menu to change the IP address.
4
HOW TO USE THE OPERATION PANEL
73
