FujiFilm 4500N instruction manual Component Names and Functions

2.1 Overview

Number	Name	Function
1	Front Door	Is opened to replace magazine or water, or to clear a donor/receiver
		jam.
2	Water Bottle	Contains the water to be applied to the donor.
3	Receiver Magazine Compartment	Contains the receiver magazine.
4	Water Filter	Removes any foreign matter from the water.
5	Operation Panel	Operation keys and indicator lamps are located here
		(see pages 16 and 17).
6	Auto Calibrator	Reads the density reference pattern and performs the calibration
		(standard color condition setup). (See page 61.)
7	Right-hand Side Upper Door	Is opened to clear a donor/receiver jam.
8	Thermal Processing Unit	Transfers an image to the receiver. The door of this unit is opened
		to clear a donor/receiver jam.
9	Power Switch	Turns the Power ON ( )and OFF ( ).
10	Inner Door Lock Lever	Locks the inner door. Also releases the nip roller for donor
		transport.
11	Thermal Processing Unit	Opens the thermal processing unit. Also opens the thermal unit
	Release Lever	door to clear a donor/receiver jam.
12	Front Lower Door	Is opened to replace the donor magazine or to clear a donor/receiver
		jam.
13	Inner Door/Donor Magazine	Contains the donor magazine.
	Compartment
14	Refuse Compartment	Is opened for refuse removal.
15	Casters	Two casters are provided at both the front and rear for moving the
		machine.
16	Left-hand Side Lower Door	Is opened to clear a donor/receiver jam.
17	Left-hand Side Upper Door	Is opened to clear a donor/receiver jam.
18	Side Air Filter	Cleans the air drawn in by the fan to cool the interior of the machine.
19	Print Tray	Finished prints are discharged into this tray.
20	Power Plug	Three-pin grounded plug
21	Power Cable	Connects the machine to a power outlet.
22	Interface Connector	Connects the Ethernet cable to the main body.

2

COMPONENT NAMES AND FUNCTIONS

15