4.10Setting the Remaining Quantity of Consumables for Alarms
To set the alarm to sound when the specified remaining quantity of donor, receiver, or water filter is reached, follow the procedure below.
PREV
ESCSEL
ON LINE | NEXT |
|
Configuration
| PREV |
ESC | SEL |
| NEXT |
| ] |
| ] |
Size | – | DP | + |
[ | [ | ||
|
|
|
|
|
| PREV |
|
ESCSEL
NEXT
Precaution Setup
1.Press the ONLINE key on the operation panel to switch the machine to OFFLINE condition.
2.When the machine is in OFFLINE mode, press the NEXT key twice.
★The message changes to "Configuration".
3.Press the SEL key.
★The message changes to "Size".
4.Press the NEXT key seven times.
★The message changes to "Precaution Setup".
| PREV |
ESC | SEL |
| NEXT |
| ] |
| ] |
Donor Alarm | – | 10 | + |
[ | [ | ||
|
|
|
|
| PREV |
ESC | SEL |
| NEXT |
| ] |
| ] |
Paper Alarm | – | 10 | + |
[ | [ | ||
|
|
|
|
■To set the alarm for the remaining quantity of donor
5.Press the SEL key.
★The message changes to "Donor Alarm".
6.Press + or – key to set the remaining quantity of donor.
★ If the remaining quantity of donor is equal or less than the entered value, the D LED on the transfer monitor blinks.
■ To set the alarm level for the remaining quantity of
receiver
7.Press the NEXT key.
★The message changes to "Paper Alarm".
8.Press + or – key to set the alarm remaining quantity of receiver.
★If the remaining quantity of receiver is equal or less than the entered value, the R LED on the transfer monitor blinks.
58
