
Guide
SelfCheck
Data Ready400
3.5 Receiver Magazine Replacement
7.Hold the leading edge of the receiver and slowly insert the receiver magazine along the guide.
NOTE: Push the receiver magazine all the way.
8.Close the front upper door.
★The message changes to "Self Check" and the machine starts the self check.
★When the
★The machine automatically cuts and discharges the unnecessary portion of the donor leading edge.
IMPORTANT:
●During the cutting of the leading edge, LED lamps 1 to 10 on the transfer monitor come on sequentially. At this time, do not open any door. If you do, donor/receiver jamming may occur.
●During the cutting of the leading edge, do not turn the power switch to OFF () or unplug the power cable. If you do, donor/receiver jamming may occur.
34