FujiFilm 4500N instruction manual This mark is displayed only

4.1 Menu

Configuration

	]	]
Size	[– A3W	+
		[
Selects the paper size.
	]	]
StandBy	[– 30min	+
		[

Selects the time required for the machine to enter power saving mode.

	]	]
Dot/Inch	– 400	+
	[	[
Selects the resolution (dpi).
	]	]
Alarm	– ON	+
	[	[

Selects buzzer ON/OFF.

Margin Control

*2 • This mark is displayed only when "Bordered/Borderless" is set to "Bordered". The user can move to lower level menus.

•"Borderless" is not available for A3-wide and A4-wide sheets.

X	]	]
	– 0	+ mm
	[	[

Adjusts the margin width in the X direction.

		]	]
	DISP.LANG.	– ENG	+		Y	– 0		+ mm
		[	[
						]		]
						[		[
	Selects the language :
					Adjusts the margin width in
	Japanese or English.
					the Y direction.
				*2
]			]			]		]
	–	Bordered	+		Border	–		+
[			[			[	3[ mm

Selects bordered or borderless.

Precaution Setup

Sets the level used to issue alarms.

Donor Alarm	]	]
	– 10	+
	[	[

Sets the number of prints at which the donor alarm sounds.

Paper Alarm	]	]
	– 10	+
	[	[

Set the number of prints at which the receiver alarm sounds.

Filter Alarm	]	]
	– 10	+
	[	[

Set the number of prints at which a water filter alarm sounds.

Calibration

]	]
Counter – Enable	+
[	[

1) PrintReference

*3

*3

Donor Count	]			]
	– 130			+
	[			[
Sets whether the donor
counter is used or not.
	]			]
Paper Count	– 130			+
	[			[
Sets whether the receiver
counter is used or not.
	]		]
Filter Count	–	130		+
	[		[

Sets whether the water filter counter is used or not.

Creates calibration patterns.	*3 This mark is displayed only
	when "Enable/Disable" is set
	to "Enable". The user can
2) MeasureDensity
	move lower level menus.
Performs a density measurement.

46