
4.6Alarm ON/OFF
Follow the procedure below to activate/deactivate the alarm which sounds when the WARNING indicator on the operation panel is turned on or is blinking, and when a donor/receiver jam occurs.
PREV
ESCSEL
NEXT
Configuration
| PREV |
ESC | SEL |
| NEXT |
| ] |
| ] |
Size | – | DP | + |
[ | [ | ||
|
|
|
|
| PREV |
ESC | SEL |
| NEXT |
| ] |
| ] |
Alarm | – | ON | + |
[ | [ | ||
|
|
|
|
1.Press the ONLINE key on the operation panel to switch the machine to OFFLINE condition.
2.When the machine is in OFFLINE mode, press the NEXT key twice.
★The message changes to "Configuration".
3.Press the SEL key.
★The message changes to "Size".
4.Press the NEXT key three times.
★The message changes to "Alarm".
Alarm
Alarm
] – [
] – [
ON
OFF
] + [
] + [
5.Press either the + or – key to select ON or OFF.
★Each time the + or – key is pressed, the alarm is turned ON (the alarm is activated) or OFF (the alarm is
deactivated) as shown below. ON → OFF → ON → ...
6.Press the ONLINE key to return the machine to ONLINE condition.
52