323mm
305mm
262mm
135mm
Partition
3.4 Donor Magazine Replacement
6.Take out the core from the donor magazine and adjust the partition to the size of the donor being used.
The size of the donor corresponds to the size of the receiver, as shown in the table below.
Size of donor | Corresponding size of receiver |
|
|
323mm | 315 mm (Double Letter Wide,etc.) |
|
|
305mm | 279 mm (Double Letter and Letter) |
|
|
262mm | 254 mm (10 x 12 and 10 x 8) |
|
|
135mm | 127 mm (4R and 5R,etc.) |
|
|
NOTE: Use the proper combination of donor and receiver. Do not use combinations other than those above. If you do, the message "Warning Check Magazine Type" appears.
7.Take out the donor roll along with the
8.Insert the donor roll into the donor replacement magazine for which the partitions were set in step 5.
3
OPERATING PROCDURES
29
