6.4Jamming at Location "3"
"J11" lever
Thermal
Processing
Front UpperUnit
Door
1.Open the front lower door, raise the thermal processing unit release lever "J11", and slowly open the thermal processing unit to the right.
NOTE: At this time, remove any jammed receiver.
CAUTION:
The thermal processing unit is hot. Do not touch the thermal processing unit immediately after opening it.
2.Close the front lower door and open the front upper door.
3.Open the | |
|
Water Coating
Section |
| 4.Push up the water coating section and rotate the "J3" knob |
|
| |
|
| counter clockwise to cause the donor to come out. Remove |
| Donor | the donor and slowly replace the water coating section to |
|
| |
|
| its original position. |
"J3" knob
6
DONOR/RECEIVER JAM CLEARING PROCEDURES
99
