4.8Checking the Remaining Consumables

To check the remaining quantity of the donor and receiver and the processing capability available

with the currently loaded water, follow the procedure below.

NOTE: The counters are reset when a replacement is detected. This menu appears only when "Counter" in "Configuration" is enabled.

Note that the proper counters may not appear if a replacement is made with the power set to OFF (O) or during printing.

1.Press the ONLINE key on the operation panel to switch

PREV

ESCSEL

NEXT

the machine to OFFLINE condition.

4

 

]

]

Counter

+

[Enable[

 

PREV

ESC

SEL

 

NEXT

Doner 130sheets

PREV

ESCSEL

NEXT

Paper 130sheets

2.Whenkey. the machine is in OFFLINE mode, press the SEL

The message changes to "Counter Display".

To check the remaining donor

3.Press the SEL key.

The message changes to "Donor".

4.Check the approximate quantity of remaining donor. The remaining quantity is displayed.

To check the remaining quantity of the remaining

receiver

5.Press the NEXT key.

The message changes to "Paper".

6.Check the approximate quantity of remaining receiver.

The processing capability is displayed.

HOW TO USE THE OPERATION PANEL

55

Page 64
Image 64
FujiFilm 4500N instruction manual Checking the Remaining Consumables, To check the remaining donor