
6.1Clearing Donor/Receiver Jams
●If the donor or receiver fails to be properly transported during printing, the machine stops and the following indications are made.
●The operation panel indicates a donor/receiver jam has occurred.
●A number or letter blinks in the monitor to indicate the location of the donor/receiver jam.
●The alarm sounds (four successive short beeps, repeated). (To stop the alarm, open the door.) No alarm sounds if "Alarm OFF" is selected in the "Configuration" menu.
●Clear the donor/receiver jam, by doing follow the procedures given in Sections 6.2 to 6.10.
J6 | J7 | J8 | Front Door (upper) |
Guide |
| Guide |
|
Magazine
R
J3 Receiver
Magazine
J2
Guide
J1
Magazine
D
J10J9
GuideGuide
Thermal
Processing Unit
J11
J12
Front Door (lower)
J5 J4
92