Management Commands |
| Command Reference |
Default Setting
None
Command Mode
Privileged Exec
7.5.3.2show line vty
This command displays telnet settings.
Syntax |
show line vty |
Default Setting
None
Command Mode
Privileged Exec
Display Message
Remote Connection Login Timeout (minutes): This object indicates the number of minutes a remote connection session is allowed to remain inactive before being logged off. A zero means there will be no timeout. May be specified as a number from 0 to 160. The factory default is 5.
Maximum Number of Remote Connection Sessions: This object indicates the number of simultaneous remote connection sessions allowed. The factory default is 5.
Allow New Telnet Sessions: Indicates that new telnet sessions will not be allowed when set to no. The factory default value is yes.
Password Threshold: When the logon attempt threshold is reached on the console port, the system interface becomes silent for a specified amount of time before allowing the next logon attempt. (Use the silent time command to set this interval.) When this threshold is reached for Telnet, the Telnet logon interface closes.
7.5.3.3line vty
This command is used to enter vty (Telnet) configuration mode.
Syntax |
line vty
181 | Intelligent Blade Panel Module |
|
