Fujitsu BX600 manual Exec-timeout 1-160 no exec-timeout

Management Commands Command Reference

Default Setting

None

Command Mode

Global Config

7.5.3.4exec-timeout

This command sets the remote connection session timeout value, in minutes. A session is active as long as the session has been idle for the value set. A value of 0 indicates that a session remains active indefinitely. The time is a decimal value from 0 to 160.

Note: Changing the timeout value for active sessions does not become effective until the session is reaccessed. Any keystroke will also activate the new timeout duration.

Syntax

exec-timeout <1-160> no exec-timeout

<sec> - max connect time (Range: 1 -160).

no - This command sets the remote connection session timeout value, in minutes, to the default.

Note: Changing the timeout value for active sessions does not become effective until the session is reaccessed. Any keystroke will also activate the new timeout duration.

Default Setting

5

Command Mode

Telnet Config

7.5.3.5password-threshold

This command is used to set the password instruction threshold limited for the number of failed login attempts.

Syntax

182 Intelligent Blade Panel Module