System Utilities |
| Command Reference |
7.11.11reload
This command resets the IBP without powering it off. Reset means that all network connections are terminated and the boot code executes. The IBP uses the stored configuration to initialize the system. You are prompted to confirm that the reset should proceed. A successful reset is indicated by the LEDs on the IBP.
Syntax |
reload |
Default Setting
None
Command Mode
Privileged Exec
7.11.12configure
This command is used to activate global configuration mode
Syntax |
configure |
Default Setting
None
Command Mode
Privileged Exec
7.11.13disconnect
This command is used to close a telnet session.
Syntax |
disconnect {<0-10> all}
271 | Intelligent Blade Panel Module |
|
