Fujitsu BX600 manual Boot-system boot-rom config opcode filename, Ping

System Utilities Command Reference

This command is used to specify the file or image used to start up the system.

Syntax

boot-system {boot-rom config opcode} <filename>

<filename> - name of the configuration or image file. boot-rom - bootrom.

config - configuration file. opcode - run time operation code.

Default Setting

None

Command Mode

Privileged Exec

7.11.7 ping

This command checks if another computer is on the network and listens for connections. To use this command, configure the IBP for network (in-band) connection (as described in the FASTPATH 2402/ 4802 Hardware User Guide). The source and target devices must have the ping utility enabled and running on top of TCP/IP. The IBP can be pinged from any IP workstation with which the IBP is connected through the default VLAN (VLAN 1), as long as there is a physical path between the IBP and the workstation. The terminal interface sends, three pings to the target station.

Syntax

ping <host>

<host> - A host name or an IP address.

Default Setting

None

Command Mode

Privileged Exec

268 Intelligent Blade Panel Module