Management Commands

 

Command Reference

This command sets a client IP mask for an SNMP community. The address is the associated community SNMP packet sending address and is used along with the client IP address value to denote a range of IP addresses from which SNMP clients may use that community to access the device. A value of 255.255.255.255 will allow access from only one station, and will use that machine's IP address for the client IP Address. A value of 0.0.0.0 will allow access from any IP address. The name is the applicable community name.

Syntax

snmp-server community ipmask <ipmask> <name> no snmp-server community ipmask <name>

<name> - community name. <ipmask> - a client IP mask.

no - This command sets a client IP mask for an SNMP community to 0.0.0.0. The name is the applicable community name. The community name may be up to 16 alphanumeric characters.

Default Setting

0.0.0.0

Command Mode

Global Config

This command restricts access to IBP information. The access mode is read-only (also called public) or read/write (also called private).

Syntax

snmp-server community {ro rw} <name>

<name> - community name. <ro> - access mode is read-only. <rw> - access mode is read/write.

Default Setting

None

191

Intelligent Blade Panel Module

 

Page 192
Image 192
Fujitsu BX600 manual Snmp-server community ro rw name