Fujitsu BX600 manual

The default settings for all the configuration commands			Default Settings
	Ip	ip javamode
		ip dhcp client-identifier text Default
		(system clear config : ip dhcp client-identifier hex <MAC
		address>)
		no ip http secure-server
		ip http secure-protocol TLS1 SSL3
		ip http secure-port 443
		ip http server
		no ip ssh
		ip ssh maxsessions 5
		ip ssh timeout 5
	username	username defaultlogin defaultList
	dot1x	no dot1x system-auth-control
		dot1x default-login defaultList
	Radius	no radius accounting mode
		radius-server retransmit 4
		radius-server timeout 5
	telnet	telnet sessions
		telnet exec-timeout 5
		telnet maxsessions 5
	snmp-server	snmp-server host 0.0.0.0 public
		snmp-server community ipmask 0.0.0.0 public
		snmp-server community ro public
		snmp-server host 0.0.0.0 private
		snmp-server community ipmask 0.0.0.0 private
		snmp-server community rw private
		snmp-server enable traps authentication
		snmp-server enable traps linkmode
		snmp-server enable traps multiusers
		snmp-server enable traps stpmode
		no snmp-server enable trap ospf
		no snmp-server enable trap dvmrp
		no snmp-server enable trap pim
	mac-address-table	mac-address-table aging-time 300

283 Intelligent Blade Panel Module