Panel Settings Menu

Web-Based Management Interface

6.2.2.2.2Viewing Interface Configuration Page This screen displays the status for all ports in the box.

Non-Configurable Port Status Data Slot/Port - Identifies the port

Port Type - For normal ports this field will be blank. Otherwise the possible values are:

Mon - this port is a monitoring port. Look at the Port Monitoring screens for more information.

LAG - the port is a member of a Link Aggregation trunk. Look at the LAG screens for more information.

Forwarding State - The port's current state Spanning Tree state. This state controls what action a port takes on receipt of a frame. If the bridge detects a malfunctioning port it will place that port into the broken state. The possible states are Disabled, Blocking, and Manual Forwarding.

Admin Mode - The Port control administration state. The port must be enabled in order for it to be allowed into the network. The factory default is enabled.

Physical Mode - Indicates the port speed and duplex mode. In auto-negotiation mode the duplex mode and speed are set from the auto-negotiation process.

Physical Status - Indicates the port speed and duplex mode. Link Status - Indicates whether the Link is up or down.

Link Trap - Indicates whether or not the port will send a trap when link status changes. ifIndex - Indicates the ifIndex of the interface table entry associated with this port. Flow Control - Indicates the status of flow control on this port.

Capability - Indicates the port capabilities during auto-negotiation. Port Description – the description for this port.

Command Buttons

82

Intelligent Blade Panel Module

Page 83
Image 83
Fujitsu BX600 manual Panel Settings Menu