Fujitsu BX600 manual Snmptrap name ipaddr no snmptrap name ipaddr, Snmptrap ipaddr

Management Commands Command Reference

Default Setting

Disabled

Command Mode

Global Config

7.5.5.3snmptrap <name> <ipaddr>

This command adds an SNMP trap name. The maximum length of the name is 16 case-sensitive alphanumeric characters.

Syntax

snmptrap <name> <ipaddr> no snmptrap <name> <ipaddr>

<name> - SNMP trap name (Range: up to 16 case-sensitive alphanumeric characters). <ipaddr> - an IP address of the trap receiver.

no - This command deletes trap receivers for a community.

Default Setting

None

Command Mode

Global Config

7.5.5.4snmptrap ipaddr

This command changes the IP address of the trap receiver for the specified community name. The maximum length of name is 16 case-sensitive alphanumeric characters.

Note: IP addresses in the SNMP trap receiver table must be unique for the same community name. If you make multiple entries using the same IP address and community name, the first entry is retained and processed. All duplicate entries are ignored.

Syntax

196 Intelligent Blade Panel Module