Fujitsu BX600 manual Sntp client port portid 6-10 no sntp client port

SNTP Commands Command Reference

Command Mode

Global Config

7.10.2.3sntp client port

This command will set the SNTP client port id and polling interval in seconds.

Syntax

sntp client port <portid> [<6-10>] no sntp client port

<portid> - SNTP client port id.

<6-10> - Polling interval. It's 2^(value) seconds where value is 6 to 10. no - Resets the SNTP client port id.

Default Setting

The default portid is 123.

Command Mode

Global Config

7.10.2.4sntp unicast client poll-interval

This command will set the poll interval for SNTP unicast clients in seconds.

Syntax

sntp unicast client poll-interval <6-10> no sntp unicast client poll-interval

<6-10> - Polling interval. It's 2^(value) seconds where value is 6 to 10.

no - This command will reset the poll interval for SNTP unicast clients to its default value.

254 Intelligent Blade Panel Module