Fujitsu BX600 manual Managing Port Groups Configuring Port Group Configuration

Groups Administration

Web-Based Management Interface

6.2.1.2Managing Port Groups

6.2.1.2.1. Configuring Port Group Configuration Page

The purpose of the port group configuration is to create port groups, and to modify the existing port groups. Only the internal ports could be defined to be the member of the port groups. The external connection is defined by specifying an Uplink Set.

Selection Criteria

Group Name – Use this pull-down menu to select one of the existing groups.

Configurable Data

Group Name – Input the group name to create a new port group. It can be up to 32 alphanumeric characters, including blanks.

Uplink Set Name – Use the pull-down menu to configure external connection for this port group.

Participation – Use the pull-down menu to configure a interface to participate in this port group. The factory default is ‘Exclude’. The possible values are:

-Include: This interface is the member of the port group.

-Exclude: This interface is not the member of the port group.

Non-Configurable Data

Slot/Port – The interface

Type – The interface type. Type should be internal.

Status – The interface is belong to this port group or not.

46 Intelligent Blade Panel Module