Management Commands

 

Command Reference

7.5.9LOCK Commands

7.5.9.1lock

This command locks the http access to the IBP and registers the passed “lock_identifier” with this lock. When the lock is set, the Web-GUI presents a message that access to this IBP is currently not possible, bcause it is managed by another application. Use the no form to restore to default value.

Syntax

lock <lock_identifier> [EXCLUSIVE] no lock {<lock_identifier>ALL}

<lock_identifier > - A alphanumeric string. (Range: 1-32 characters). no - This command is used to restore to default value.

Default Setting

None

Command Mode

Global Config

7.5.9.2lock_message

This command allows specification of the displayed message in the Web-GUI of IBP when a lock is set. It must be possible to specify any HTML string. Use “lock_message default” to restore default value.

Syntax

lock_message {<message_string> default}

<message_string > - A specify HTML string. (Range: 1-512 characters). lock_message default - This command is used to restore to default value.

Default Setting

<message_string > : “This intelligent Blade Panel is currently managed by a Virtual IO Manager. Therefore it is not possible to configure this module by the HTTP user interface.

206

Intelligent Blade Panel Module

 

Page 207
Image 207
Fujitsu BX600 manual Lock Commands, Lock lockidentifier Exclusive no lock lockidentifierALL, Lockmessage