Groups Administration
6.2.1.6Managing Port Backup
6.2.1.6.1. Configuring Port Backup Configuration Page
Two link aggregation groups are associated with one uplink set as the uplink set is created. Two link aggregation groups are defined as active and backup port internally. One of two link aggregation groups will be activated at a time. For example, as active link aggregation group is link up, the backup aggregation group will be blocked (no traffic could be sent or received). Otherwise, if active aggregation group is link down (all members of the active aggregation group are link down), the backup aggregation group will be activated. As the active aggregation group is link up again, the backup one will be deactivated.
Configurable Data
Active/Backup – Select field to set the interface to be in active aggregation group or backup aggregation group.
Non-Configurable Data
Slot/Port – The interface.
Port Group – The name of port group that this interface belongs to.
Status – Active or Backup.
Command Buttons
Submit – Update the IBP with the values on this screen. If you want the IBP to retain the new values across a power cycle, you have to perform a save.
58 | Intelligent Blade Panel Module |
|