Security Commands

 

Command Reference

no - This command sets the authentication mode to be used on all ports to 'auto'.

Default Setting

auto

Command Mode

Global Config

This command sets the authentication mode to be used on the specified port. The control mode may be one of the following.

force-unauthorized:The authenticator PAE unconditionally sets the controlled port to unauthorized.

force-authorized:The authenticator PAE unconditionally sets the controlled port to authorized.

auto: The authenticator PAE sets the controlled port mode to reflect the outcome of the authentication exchanges between the supplicant, authenticator, and the authentication server.

Syntax

dot1x port-control {auto force-authorized force-unauthorized} no dot1x port-control

no - This command sets the authentication mode to be used on the specified port to 'auto'.

Default Setting

auto

Command Mode

Interface Config

7.9.3.7dot1x max-req

This command sets the maximum number of times the authenticator state machine on this port will transmit an EAPOL EAP Request/Identity frame before timing out the supplicant. The <1-10> value must be in the range 1 - 10.

Syntax

237

Intelligent Blade Panel Module

 

Page 238
Image 238
Fujitsu BX600 manual 3.7 dot1x max-req