Fujitsu BX600 manual Sntp broadcast client poll-interval, Sntp client mode

SNTP Commands Command Reference

7.10.2.1sntp broadcast client poll-interval

This command will set the poll interval for SNTP broadcast clients in seconds as a power of two where <poll-interval> can be a value from 6 to 16.

Syntax

sntp broadcast client poll-interval <6-10> no sntp broadcast client poll-interval

<6-10> - The range is 6 to 16.

no - This command will reset the poll interval for SNTP broadcast client back to its default value.

Default Setting

6

Command Mode

Global Config

7.10.2.2sntp client mode

This command will enable Simple Network Time Protocol (SNTP) client mode and optionally setting the mode to either broadcast, multicast, or unicast.

Syntax

sntp client mode [broadcast unicast] no sntp client mode

no - This command will disable Simple Network Time Protocol (SNTP) client mode.

Default Setting

None

253 Intelligent Blade Panel Module