Management Commands |
| Command Reference |
<name> - community name (up to 16
no - This command removes this community name from the table. The name is the community name to be deleted.
Default Setting
Two default community names: public and private. You can replace these default community names with unique identifiers for each community. The default values for the remaining four community names are blank.
Command Mode
Global Config
This command activates an SNMP community. If a community is enabled, an SNMP manager associated with this community manages the IBP according to its access right. If the community is disabled, no SNMP requests using this community are accepted. In this case the SNMP manager associated with this community cannot manage the IBP until the Status is changed back to Enable.
Syntax |
<name> - community name.
no - This command deactivates an SNMP community. If the community is disabled, no SNMP requests using this community are accepted. In this case the SNMP manager associated with this community cannot manage the IBP until the Status is changed back to Enable.
Default Setting
The default public and private communities are enabled by default. The four undefined communities are disabled by default.
Command Mode
Global Config
190 | Intelligent Blade Panel Module |
|
